標準編號:GB/T 13288.2-2011
中文標準名稱:涂覆涂料前鋼材表面處理 噴射清理后的鋼材表面粗糙度特性 第2部分:磨料噴射清理后鋼材表面粗糙度等級的測定方法 比較樣塊法
英文標準名稱:preparation of steel substrates before application of paints and related products - surface roughness characteristics of blast-cleaned substrates - part 2: method for the grading of surface profile of abrasive blast-cleaned steel - comparator procedure
首次發布日期:1991-12-13
標準狀態:現行
強制與推薦:推薦性標準
復審確認日期:
代替標準號:替代GB/T 13288-1991
被代替標準號:
廢止時間:
采用國際標準編號:ISO 8503-2-1988 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分:磨料噴射清理表面的粗糙度定級方法 比較樣塊法,等同采用
采用國際標準名稱:
采用程度:
采用國際標準:ISO 8503-2:1988 IDT
語言:簡體中文版,英文版
發布日期:2011-12-30
實施日期:2012-10-01
標準類型:
標準類別:國家標準
中國標準文獻分類法(中標分類CCS):綜合>>基礎標準>>材料防護
國際標準分類法(ICS):機械制造 >>表面處理和涂覆 >>表面預處理
標準頁數:8頁
主管部門:全國涂料和顏料標準化技術委員會涂漆前金屬表面處理及涂漆工藝分技術委員(sac/tc 5/sc 6)
歸口單位:全國涂料和顏料標準化技術委員會涂漆前金屬表面處理及涂漆工藝分技術委員(sac/tc 5/sc 6)
起草單位:中國船舶工業綜合技術經濟研究院、中國船舶工業集團公司第十一研究所、山東淄博大亞金屬科技股份有限公司、山東開泰集團有限公司、廣州中船黃埔造船有限公司、浙
起草人:
標準前言:
引用標準:ISO/FDIS 4618 Paints and varnishes. Terms and definitions;ISO/FDIS 8501-1 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings;ISO/DIS 8503-1 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces;ISO/DIS 8503-3 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure;ISO/DIS 8503-4 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure;ISO/NP 8504-2 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning